How-do-I-choose-a-chainsaw How-do-I-choose-a-chainsaw

Purchasing a new chainsaw may seem like an intimidating task, especially if it is your first time. If you browse through online information, you will realize that there are so many factors to consider. The engine size, length of the chain bar, and cutting power are some of the things that can keep you reading all sorts of articles.

It doesn’t have to be that hard, and that’s why I decided to come up with this guide to help you find the right chainsaw for your work.  Whether you are a beginner or a seasoned professional, this article will come in handy as you look to acquire the best homeowner chainsaw in the market. Let TheOldHouseSalvage.com get started!

Identify the task

How do I choose a chainsaw

What do you intend to do with your new chainsaw? Every machine is built with a certain cutting objective in mind. Professionals already know that this is not a guessing game otherwise, you will end up regretting your choices. Sometimes people blame the quality of the chainsaw, yet they are using it for unintended tasks. A chainsaw that was manufactured to carry out lightweight tasks cannot and should not be used to cut down hardwoods.

Suppose you are planning to use the machine a few times every year for light cutting. Which chainsaw should you choose then? In this case, I will recommend that you go with an electric-powered one. This is perfect for light tasks that will take a few minutes or hours.

A cordless electric chainsaw is a great pick if you will be moving from one place to another. For tasks that can be done within a fixed position, you might consider a corded chainsaw. One disadvantage of a cordless one is the fact that the battery cannot sustain you for many hours while. On the other hand, corded ones are also limited by their extension cable.

If you are planning to cut a whole forest of trees, then a gasoline-powered chainsaw is your best choice. Also, pick one with an engine of at least 45cc and everything should run smoothly. With this, you will not be limited by the battery life or an extension cable. All you have to keep an eye on is the fuel level.

Which type of trees will you be dealing with? There are some woods, such as birch, beech, and dogwood, that require very high cutting power. As such, whether you’ve decided on an electric or gas-powered chainsaw, make sure to choose the most powerful. However, gas-powered are generally more powerful than their counterparts. Therefore I would recommend that you stay away from electric chainsaws if this is your intended purpose.

Are you experienced enough?

Another very important factor has to do with your prior experience. If you have never bought a chainsaw before, I would recommend the smaller ones. Remember this is the most dangerous tools available to man, and that’s why you will find movie stars using them as weapons.

The chain is not guarded; therefore, the shortest is the safest for you. A guide bar of between 12” and 18” should work just fine for you. Again, this is dependent on the task you are looking to accomplish.

Identify the frequency of your usage

Yes, this is also very significant in your hunt for an ideal chainsaw. Both categories have advantages over each other depending on how often you will be cutting down your trees.

Electric chainsaws are perfect for those chores that are far apart throughout the year. If your machine will remain unused for more than a month, then you should pick one that doesn’t require regular maintenance. Gasoline engines need more maintenance; otherwise, they will be damaged within a few months. Electric motors, on the other hand, can go a long time without maintenance even if they are unused.

As for more frequent tasks, gas-powered chainsaws are the best because of their durability. Although it might vary from one manufacturer to another, gasoline chainsaws seem to sustain tough conditions for longer periods than the electric ones.

Consider Those Around You

Consider Those Around You

Where will you be cutting your trees? Does the environment favor the sound of the engine? These are some of the questions you should ask yourself before moving forward. Gasoline chainsaws are very noisy for obvious reasons. Therefore, they might not be ideal for cutting woods near your neighbors. Not everyone is comfortable with the buzz of a chainsaw at work, so don’t be inconsiderate.

What is Your Budget?

So you have already decided on which type of chainsaws you need. The next step is to narrow down to the one that meets all your needs at an affordable price. Affordability is subjective, and everyone has their range. Similarly, there is something for everyone in the chainsaw market. You need to make up your mind and do your calculations.

Chainsaws can for as low as $70, but these are mostly electric ones. If you have heavy tasks, you might want to consider high-quality gasoline chainsaws going for at least $200. As an expert, if your budget allows, why not get yourself the most powerful one available? Stihl and Husqvarna have large chainsaws retailing at about $2,000. If you need more information on the cost of chainsaws, we have an article that covers the subject in details.

Closing Remarks

In summary, the main factors you should keep in mind before buying a new chainsaw are the intended purpose, environment, and your budget. With these points checked off, you will not regret your purchase.

As I have stated in most of my guides, safety should always be the priority. The number of reported injuries due to these machines is quite high and seems to be increasing every year. So, before you start operating your chainsaw, make sure you know what you are doing. Wearing protective gear should never be optional.

What is the best chainsaw for cutting trees What is the best chainsaw for cutting trees

It is sometimes quite difficult to find the chainsaws that perfectly fit your needs. But hey! It is not impossible, and that is why Old House Salvage have compiled this article to point you to the right brands. Since there isn’t one perfect chainsaw, we have come up with a list from which you can choose your ideal machine.

In our research, we reviewed all popular chainsaws in the market while considering their features and the manufacturer’s reputation. Therefore, rest assured that any chainsaw you pick from our list will be worth the money spent.

Ready? Let us get started!

Husqvarna 460 Rancher Chainsaw

Based on reviews from a bunch of users and its overall reputation, there is no reason why Husqvarna 460 Rancher shouldn’t be top of our list. Whenever you need any gardening-related tool, Husqvarna has got you covered. The 460 Rancher is one of the best gas-powered chainsaws around. It weighs about thirteen pounds, or six kilograms if you like. Since your main objective is to cut down trees, one of the main things to consider in a chainsaw is the engine. Well, you should always pick the best anyway regardless of the intended purpose. Husqvarna 460 Rancher comes with a two-cycle engine with 3.6 horsepower and a displacement of 60.3cc. It also has an X-Torq engine design that is crucial in increasing the torque hence ensuring maximum power. The LowVib features reduce vibration, allowing you to handle the chainsaw comfortably.

What is the best chainsaw for cutting trees

With a side-mounted chain brake, you are guaranteed efficiency and flexibility while pruning those notorious trees. It is also fairly simple to operate with a starter handle and a Smart Start decompression valve installed to make its starting process a lot easier. The centrifugal air cleaning system allows longer operations before you are required to clean the filters. Are you interested in buying this chainsaw? Due to its excellence, expect to part with at least $520.

Husqvarna 450 Pruning Chainsaw

Husqvarna 450 Pruning Chainsaw

Another release from Husqvarna is this petrol chainsaw with a power dissipation of up to 2.4KW. If you exclude the cutting equipment, Husqvarna 450 weighs about 4.9 kgs (10 pounds). As such, you really need to measure up to the task because it will feel dead weight once you start your pruning sessions. Similar to the 460 Rancher, it also has an air filter that allows for quick and easy cleaning. The bar length is about 50cm (19.7 inches) and cuts up to 24 inches across the wood.

You might be wondering about its engine specs. Husqvarna decided to give it a 50cc X-Torq engine with 3.2 horsepower output. Its maximum speed during operation is about 9,000 revolutions per minute. The design of the engine ensures fuel efficiency while increasing its overall performance. Are you planning to buy this particular chainsaw? It goes at around $542, but we guarantee you that it is worth the cost.

As stated earlier, there is no ideal chainsaw for everyone, but there are many excellent ones to choose from. If you are looking for a cheap chainsaw with great performance, we recommend that you consider this pick. It is arguably the best cordless chainsaw currently in the market and goes for between $160 and $190 depending on the retailer.

Greenworks GD40CS40

Greenworks GD40CS40

Greenworks GD40CS40 is fitted with a 26-inch long Oregon bar ensuring efficient cutting process. It also runs on a brushless motor powered by a 40-volt G-Max Li-Ion battery that will ensure a 25-minute operation. It takes up to one and a half hours to fully recharge. Its ability to cut across about 28 inches of wood makes it a great choice.

However, the downside is the fact that it sometimes doesn’t come with a battery and charger. Therefore, you might need to part with another $108 for a complete set. Luck is on your side if you have other electric products from the company since you can easily swap the batteries and chargers.

Einhell GH-EC 2040

Since we are looking at the best chainsaws in all categories, why don’t include this corded one in the list? If your intended purpose requires you to be mobile, then this is not for you. Electric Einhell is an excellent performer highly rated by most logging experts. That is probably the reason why it is currently one of Amazon’s best selling models.

Einhell GH-EC 2040

It comes with a 40-cm bar and dissipates about 2000W. The chain is not fitted, so you will need to so by yourself. But do not worry, this is a pretty easy job provided you follow the manual to the latter. One impressive addition to this chainsaw is the kick-back cut-off technique that automatically cuts the power off to prevent any injuries.

Einhell is not our first choice recommendation for the obvious reason. The fact that it is corded means you will need an extension cable. As such, your work will be limited to a small area. So, if you are looking to go deep into the forest, you should buy gas or battery-powered chainsaw.

One Last Thing…

If you are still a beginner, electric cordless chainsaws will work just fine. However, if you are looking to chop down some trees like a pro, it would really be a good idea to get yourself one of the gasoline engine chainsaws listed above.

Please remember to always wear the correct protective gear before embarking on your work. I can’t stress this any further owing to the fact that thousands of people sustain chainsaw-related injuries every year. If you are not sure of what you have to do, don’t hesitate to hire an expert.

Read More:

Who Invented Modern Chainsaw?

How Do Chainsaws Work?

Who Invented Modern Chainsaw Who Invented Modern Chainsaw

Surprisingly, chainsaws were first used in the medical industry. Yes, that’s right! The “weapon” preferred in today’s horror movies was initially one of the instruments used during childbirth. It was utilized in a symphysiotomy – a method that ensures quick delivery of a child from a woman’s womb.

Since we are in about chainsaw history, why not have a brief look at the procedure? Just like a wire saw, the chainsaw had a long chain with ‘teeth.’ The doctor would wrap the chain around the pelvic bone then alternately pull both handles. This movement sliced through the symphysis a lot faster than an ordinary knife.

Who Invented Modern Chainsaw

Anyway, I assume you are here because of the chainsaws you have seen cut down trees. So let’s get down to it!

Evolution of Chainsaws

Let us travel back in time to the 19th-century when experts started adding some modifications to the already existing chainsaws. Many have claimed to be the inventors of the first chainsaw, but Bernard Heine’s invention of the 1830s predates them. However, this osteotomeman was not as advanced as the ones that came into existence years later.

Samuel J. Bens claimed a patent for “the endless chainsaw” in 1905 before James Shand came up with a portable chainsaw 13 years later. Unlike what you see today, “portable” at the time referred to a two-person operated chainsaw. 

Andreas Stihl, a German, was granted a patent for the first electric chainsaw in 1926. This is arguably the time when modern chainsaws were first invented. Andreas Stihl’s machine weighed more than 140 pounds. Yes, that is approximately 20,317 tea bags… Don’t mind me; I love tea!

Do you have a high-end chainsaw (22 lbs.)? Imagine having to lift seven of them. As such, it would also require two people to operate this electric chainsaw. Well, you wouldn’t really blame our grandparents’ slow adoption of this machine, would you?

A year later (1927) Emil Lerp joined his fellow countryman in the invention process. Lerp came up with a gasoline-powered but was faced with multiple problems. Maybe the fact that it required two operators due to its weight of 125 lbs was another issue. But the Father of the Modern Chainsaw was there to make things right. Stihl made improvements to the gasoline-powered chainsaw – he named it the tree-felling machine – and patented it in 1929.

There you have it, Andreas Stihl was the inventor of what Old House Salvage know today as the modern chainsaw. So who exactly was Andreas Stihl?

Who was Andreas Stihl?

Born in 1896, Stihl was an engineer who played a huge role in the world of chainsaws. He is often referred to as “the Father of the Modern Chainsaws.” As you can see from the history above, he is undoubtedly deserving of that name. In 1926 – the same year of his ground-breaking invention – he founded his own company.

By 1931, the company had grown to become the first European chainsaw exporting company. Its market was mostly in America and Russia. Stihl’s company was also the leading supplier of saws to the Nazis.  Jonsered created the design utilized by the company today in 1954.

Who was Andreas Stihl

Stihl is run as a private entity by Andreas Stihl’s family – four children. Apart from chainsaws, Stihl also produces edgers, hand tools, protective apparel, blowers, and lubricants.

How did Oregon contribute to the evolution of chainsaws?

If you are intimately familiar with the logging industry, you must be aware of Oregon chainsaws. In as much as Stihl modernized chain saws, there were still a lot of improvements that needed to be made on the same. Some of the main problems that needed addressing at the time were portability and kickback.

What is kickback? Well, this is probably one of the leading causes of chainsaw-related injuries. It might be due to the tip of the chain touching an object. Sometimes it occurs when the wood pinches the saw chain. The consequence of this is what can be very dangerous to the operator. It may lead to a lightning-first reaction that kicks the guide bar forward and back towards the user. If the operator is not able to control it, he will most likely end up with a severe cut.

Charles Wolf and Redman were the first teams to address the issue of portability. They would go on to patent the world’s first portable chainsaw in 1920. Redman would work towards reducing the weight of the power source while Charles dealt with the cutting chain. As stated earlier, all chainsaw’s at the time required two men to operate. By late 1920s, Stihl had become their biggest competitor, who also went on to manufacture a saw that weighed only 46 lbs.

In the late 1960s, Oregon joined the rest of the chainsaw world in researching how to reduce kickback hazards. After the development of kickback test machines in 1972, the company started producing kickback-tested products. The first batches to be produced were the 91 and the 76 series released in 1974 and 1976 respectively. The role of the Oregon engineers in the creation of the 1981 ANSI B175.1 safety standards will always be appreciated.

Final Words…

The importance of chainsaw invention proved to be a game-changer in the world of logging. We appreciate the work done by the likes of Andreas Stihl, Charles Wolf, Emil Lerp, and any other person involved in the improvement of these machines. Although there haven’t been significant changes over the past few decades, you can expect some more innovations in the near future. A new beginning might be upon us with two engineers looking to come up with a chainsaw powered by a jet engine turbine. Follow our blog for more updates on the same. 

Let us know if this piece was helpful. Cheers!

How Much Do Chainsaws Cost How Much Do Chainsaws Cost

So you have decided to buy a chainsaw and wondering how much it is going to cost you? Don’t worry, we’ve got you covered! You should, however, know that chainsaws vary in cost based on their performance and brand.

If this is your first time buying a chainsaw then maybe you should know the basics. First, chainsaws are categorised into two (or three if you like) on the basis of the power source. They can either be gasoline or electric powered, with the latter being further divided into two. Depending on your intended purpose, you can either go for a corded or cordless electric chainsaw.

Maybe you are wondering how different electric chainsaws are from the gasoline-powered ones. Well, the main difference is the power source which is clearly stated in their names. This is what brings the buzz and weight variance with the electric-powered proving to be much lighter. Both the corded and cordless electric saws are also a lot easier to start. You can check out more differences between these two categories in our other articles.

Have you identified your ideal machine? Alright, let us move on to our main subject today.

How Much Do Chainsaws Cost

How much is the Cheapest Chainsaw?

As they say, cheap is expensive! So, before you take that chainsaw for a few grands, make sure you have all the necessary information. There are some low-budget chainsaws that can perfectly do the job. However, some of them are not quite durable, and you might find yourself going back to the store after a few cutting sessions.

If you look around, you will find many chainsaws that cost way below $200. If this is the range of your budget, do not panic as OHS have a few picks for you. As you will realize from our list, the cheapest quality chainsaw goes for only $73.

  1. Zombi ZCS12017 (Price: $73.50)
Zombi ZCS12017

Our best low-budget pick is the Zombi corded electric chainsaw. It has a 16-inch Oregon bar which allows for efficient cutting. It also requires 120 volts and 13 Amps to run smoothly as the steel teeth chew through the toughest wood you have.

  • Black+Decker LCS1020B (Price: $79.99)
Black+Decker LCS1020B

LCS1020B has a 10-inch chain bar and runs on a 20V battery. However, you will need to buy the battery separately, which shoots the price to about $100.99.

  • Worx WG322 (Price: $120.00)

A 20v battery powers this lightweight cordless chainsaw. If you are not an expert, the automatic tension system will get you started. The battery indicator will also help keep an eye on your battery’s life.

  • Remington RM4216 Rebel 42cc (Price: $136.42)

If you are into gas chainsaws, RM4216 is your beat pick on low-budget. It has a 16-inch chain bar powered by a 42cc engine.

  • Poulan Pro 50cc (Price: $199.99)
Poulan Pro 50cc

Its OxyPower engine technology guarantees a more powerful engine with less emission and higher fuel conservation.

How much is the Most Expensive Chainsaw?

If you are looking for a high-quality chainsaw, you might need some more cash. But remember that not all expensive chainsaws offer the desired performance. Therefore, ensure that you do your research before you part with the cash.

Highly reputable brands in the world of chainsaws include Stihl and Husqvarna. As such, it is no surprise that the most powerful and expensive chainsaw currently in the market comes from Stihl.

How much is the Most Expensive Chainsaw

Stihl MS 880 a 121cc engine goes for over $2,099 depending on the dealer. Another pretty expensive chainsaw is Husqvarna’s 3120 XP with a 42-inch maximum bar length. If you are looking to own this, you will have to arm yourself with at least $1,800.

How do Gasoline and Electric Chainsaws Vary in Cost?

In general, gas chainsaws will probably cost you a few more thousands than an average electric chainsaw. This difference is due to the complexity in the design of gasoline chainsaws which guarantee higher cutting power. Also, they are arguably more durable than electric chainsaws.

Lighter-duty gasoline chainsaws may cost as little as $180, but they can only be used for routine cutting and pruning. The most expensive gas chainsaw is also the most powerful, so rest assured that it will be worth the money. As for electric chainsaws, corded is cheaper than the cordless chainsaws. You could acquire them at only $70.

In conclusion…

As you can see from the information above, the price of a chainsaw varies based on several factors. One is the brand and its reputation in the market. Stihl and Husqvarna have been around for quite some time now, and they are probably the best available. You can even see it from the pride shown by the users.

But remember the price is not necessarily the determinant of a chain saw’s quality. If you are still new in the field, it is always a good idea to look up for some of the best features before purchasing your desired chain saw. I would recommend that you buy a cordless electric one because of how easy it is to operate.

Read More:

How Do Chainsaws Work?

How Do Chainsaws Work How Do Chainsaws Work

The world of logging has never been the same since the invention of a chainsaw. Nearly a century or so ago is when the first chainsaw that resembled the modern ones were put in use. As you will notice, most of them were operated by two men because of their weight and how it was manufactured. Today, however, all popular chainsaws are light enough to be run by one operator and are far more efficient. But have you ever asked yourself how this machine works?

Well, to answer this question, you will first need to know the type of chainsaw you own. Sorting using this criterion is really easy because there are only two types. It can either be a gas or electric chainsaw depending on the power source. Under electric chainsaws, you can have one with an extension cable or a cordless chainsaw. Knowing how a machine works is crucial for its safety and yours as the operator. As such, we have compiled a guide to help understand the ins and outs of your chainsaw.

How Do Chainsaws Work

The Main Parts of a Chainsaw

Like any other device or machine, you will need to know and understand its main parts before going into many details. For a chainsaw, these include an engine, fuel tank, clutch, carburettor gears, guide bar, sprocket, and spark plug. All these parts coordinate with each other to ensure a smooth operation of the chainsaw. You can also categorise these parts into two; the power source and the cutting area.

How Do Chainsaws Work 1

Let us start with the power source. This is what powers the entire machine and helps rotate all the moving parts. As earlier stated, the source can either batteries or gas. In place of an electric motor in electric chainsaws, there is a petrol engine. Apart from this difference, all chainsaws generally work in the same way.

So, how does a chainsaw turn electricity or gasoline to sawdust? Obviously, that is not what literally happens; the chemical energy stored in gasoline or batteries is converted to useful mechanical energy. This is the energy you use to cut down or prune trees. Anyway, enough with scientific language!

If you have a gasoline chainsaw, it most-probably has a two-cycle engine fitted. As such, you will have to mix gasoline with oil when refuelling. Attempting to run the chainsaw without the required type of oil will cause ceasing. This is due to lack of lubrication of the engine’s moving parts. High torque output with relatively lightweight is the main benefit of these engines.

Now that you have the gas tank full, what happens next? Starting the gasoline engine is fairly simple, but you will need to follow the right procedure. First, turn on the ignition switch then pull the starter rope out. When you do the latter, here what’s going on within your chainsaw;

  • The starter rope is set such that when you pull it, the drive cap on the flywheel is engaged. Note that the flywheel has permanent magnets built into it – we will explain the purpose of this later.
  • Consequently, the motion is transferred to the crankshaft, which also rotates as the rope is pulled. This crankshaft is connected to a piston which, as you may guess, will, in turn, react to all these movements. Are we still together?
  • In the process, the piston is forced to move up and down within the cylinder. It is at this point that the ignition process starts. Do you remember the permanent magnets in the flywheel? Well, the purpose of this is to create a magnetic field as it rotates past the ignition coil which strategically positioned along its path. Electricity is induced into the coil, and the voltage travels to the spark plug.
  • The downward movement of the piston within the cylinder opens an intake point of air, oil, and fuel into the cylinder. When it moves back up, a vacuum is created, and the same content is sucked into the crankcase.

However, the fuel in the cylinder is ignited by the sparks from the spark plug hence forcing the piston to move back. The process is repeated within a split second leading to the piston’s continuous movement which is converted to rotary motion by a crank and rod.

The operation of an electric power source is pretty straightforward. Instead of starting the gasoline engine, a motor is supplied with current. The resulting rotation of this motor is what is used by the rod and crank.

The rotary power gained is transmitted by a drive shaft to the centrifugal clutch, which in turn transfers it to the chain. How does the chain receive this power? Well, first it is important to note that the chain is held in position by the sprocket.

This sprocket is connected to a system of gears linked with the clutch. As such, your engine running doesn’t necessarily mean that the chain will also run. This idle position ensures safety and energy preservation. The guide bar, as the name suggests, guides the chain as its sharpened teeth slice through the wood.

Closing Remarks!

The process described in this article is the basic operation of all chainsaws. Depending on the manufacturer, you might find a few varying specs, especially in terms of size. An ordinary chainsaw has a 16-inch cutting bar and a gasoline tank with a capacity of 0.5 litres. Another thing that you might want to keep in mind is the engine’s horsepower. A two-stroke engine usually develops up to 3 horsepower.

Closing Remarks

One last thing… If you try to run your chainsaw and the engine stalls, you might want to check the spark arrestor. Usually, a clogged spark arrestor will prevent the exhaust from exiting the engine. Using the wrong type of oil or too much of it is the main cause of the clog.

Sometimes your engine might not start at all. If that is the case, then the cause could be a defective spark plug or carburettor which you can either clean or replace. Old House Salvage hope that this content was helpful to you. Feel free to leave us a comment below. Happy logging!!

Chainsaw History: What You May Not Know

Chainsaw-History Chainsaw-History

When you think about the modern day chainsaw, there is a good chance that you think about easily slicing through trees, bushes and essentially anything that you put the saw too.  However, there is a good chance that you have no clue about the rich history that the chainsaw actually has.

Originally designed and developed in the early 1920’s, the motorized chainsaw was originally created to help increase the amount of timber production that workers were able to provide.  When compared to the non-motorized saw, the chainsaw was a much faster, more efficient tool in getting the same exact job done.  And on top of that, it was also much cheaper than having workers saw by hand.  You can think of it as the first non-motorized saw taking the place of an axe.  That is exactly what happened when the motorized chainsaw was developed and introduced.

Chainsaw History

The history of people working within the forest runs just about parallel to that of the human race being alive.  For hundreds and thousands of years, the forest would be directly linked to the problems, development, and even evolution of the human civilization.  Over time, that dark and threatening forest that people were scared to venture into would eventually become the number one timber supplier of all time.

Essentially, the forest was finally tamed, meaning that in today’s day and age, it is not just an important economical factor, but is also considered a source of many different functions, some of which include recreation, as well as protection.

For the past several hundred years, the job of lumberjack was known as one of the lowliest, putting those involved at the very bottom of any social ladder.  However, that would all change when the modern day chainsaw was introduced to them.  I fact, the chainsaw would single handedly improve all of the social prestige that lumberjacks would experience, as well as their own self-esteem.  The chainsaw would essentially turn a lowly lumber worker, into a modern day, respected machine operator and lumber specialist.

From Axe to Saw

If you look back into the history of humans and forests, you will notice that the axe is the oldest and most traditional wood cutting tool in history.  The use of the axe actually reaches so far back in human history that it was originally formed out of stone, bronze, iron, and copper, will reflect exactly how important it really was no matter what culture you were in.  As if that weren’t enough, the axe would actually be the most important and widely used tool in the entire world for cutting trees, all the way up until the 19th century.

Looking for a more efficient way to cut lumbar, a Germanic tribe would invent the first saw in history around the year 5000 B.C.  They did this by creating small sized teeth into a flint that was shaped in a half moon.  While there is no way of knowing whether or not these particular saws were actually used to cut down trees or other varieties of wood, they were still the very fist saws in human history.

Later on when copper was discovered, it would take the place of any stones or rocks, having bronze take their place.  These saws and axes would be used to cut trees and other types of wood.  Then around the year 750 B.C., iron would eventually replace the bronze that was previously used, but bronze would still be the main metal for saws for many more centuries to come.  With that being said, just know that the bronze versions were not used so much in cutting down trees, but rather by doctors, surgeons, and artisans.

While there is no official proof that that saws were actually used in any type of forestry work, saw mills did exist and were notorious for cutting tree trunks into smaller planks.  In fact, around the year 1500, Leonardo da Vinci would also spend a little bit of time with saws, sketching the very first saw that was used by pushing and pulling.  Before then, saws would either be pushed (as was considered to be the European style) or by pulling (as was considered to be the Asian style).

The Introduction of the Motorized Saw

Motorized Saw

With saws being used throughout history, it would not be until the 1920’s that someone would eventually invent the modern day chainsaw.  While there are three main chainsaw producers (Wolf, Westfelt, and Stihl), the latter would become the largest chainsaw producer on the entire planet.

In the beginning days of the chainsaw, the original intent was to make doing forestry work much easier as well as much more productive.  When you combine these things, you are going to also have an increase in profit.  The major developments when it comes to the chainsaw look like this:

  • 1926:  The German company Stihl develops the very first electro-chainsaw
  • 1927:  The first petrol-based chain saw was developed by Dolmar
  • 1950:  The creation of he very first one-man chainsaw
  • 1964:  The introduction of the first ant vibration system
  • 1972:  The introduction of the chain brake
  • 1982:  The automatic chain brake (quick stop) is introduced
  • 1989:  The catalyzer is introduced
  • 1991:  Automatic start is added

Working with a Chainsaw

Working with a Chainsaw

There is no doubt about the fact that when you are working with a chainsaw, you are going to be in some type of danger.  Chainsaws are just dangerous.  In fact, there is actually one accident for every 1100m of wood that is worked.  When using a chainsaw, your most exposed body parts are going to be you left leg, as well as your left arm.  With that being said, just know that the number one cause of chainsaw accidents is going to be the chainsaw’s kickback, which is considered to be a sudden rising of the chainsaw when the chain and nose of the saw meet the wood that is meant to be cut at a precise angle.  The next leading cause of chainsaw injury can be summed up to stumbling while operating the machine.

The chainsaw has been a pivotal tool when it comes to helping cut down trees and other types of wood.  Without the invention of the chainsaw, there is no telling the effect that not having this amazing machine would have on the world.

By Old House Salvage – OHS